Foot pegs?

[ed4554]

I would like to lower the foot pegs on my 1200gs anyone got any recommendations?

ED

 

[Den]

Yep .......... lean over further.

 

[ed4554]

Thanks Den left myself open to that one.

Ed

 

[2 wheel humvee]

I would like to lower the foot pegs on my 1200gs anyone got any recommendations?

ED

If you only need to lower your pegs a little, half inch or so?
Try Fastways,grippy,comfortable,better grip on when standing on the pegs etc. and look trick
Nippy Norm sells 'em
http://www.nippynormans.com/products.asp?dept=254

They mount in 1 of 2 positions Normal and LO,worked for me on my 1150

 

[Harps]

Just put Fastways on my ADV. Lowers the pegs to a more comfortable position now i have a Corbin seat. Great buy.

 

[steveuk]

have fastways also - all good - def. worth the money - under 10 minutes to fit ...only tools required - pair of pliers + hammer. (and the allen key comes supplied)

 

[ed4554]

Thanks for the feed back. Put an order in with Nippy today for the Fastway footpegs.

Ed

 

[Harps]

When you are putting them on you will need to tweak the spring to fit as i found out. Not sure if it is the same on the 1200GS but it was on the ADV.
The link below shows a piccy.

http://www.ukgser.com/forums/showthread.php?t=64455

 

[aspad]

If they come set in the high position, then removing the centre pin to set them to low can take quite a bit of force - in my case a vice + a fair degree of persuasion with a hammer and a piece of wood. The machine tolerances are so good that the pin fits very tight.
Great buy - probably the best mod I've put on the GS.