Fork leg protectors fitting

[Robbi]

I have acquired a set of MOTORWORKS fork leg protectors from this parish ( many thanks Dave) but I have no idea how to fit them. !!
I've searched for instructions or YouTube videos but with no luck ( could by my computer skills.)
Does anyone have a link to instructions or YouTube vids that I could look at please.?

Thanks in advance

Robbi

 

[Scotriders]

They should have two screws in each which go into fittings behind the covers, the fittings have slots for cable ties which fasten around the legs.

Sent from my FIG-LX1 using Tapatalk

 

[Robbi]

They should have two screws in each which go into fittings behind the covers, the fittings have slots for cable ties which fasten around the legs.

Sent from my FIG-LX1 using Tapatalk

Thanks for that, what about the sticky backed foam rubber strip.? Does it go around the fork leg where the cable ties go.?

 

[Scotriders]

I'd guess so but I bought mine used from here too and it didn't come with foam, I put a bit of insulting tape under my cabe ties to stop marking.

Sent from my FIG-LX1 using Tapatalk

 

[Robbi]

That'll do me. . Many thanks for your help

Robbi

 

[lucas]

Sticky backed rubber strips round the fork legs and the cable ties over them to hold the securing pieces.

If these have been used before i cant see the rubber strips being in very good condition.

 

[Robbi]

Sticky backed rubber strips round the fork legs and the cable ties over them to hold the securing pieces.

If these have been used before i cant see the rubber strips being in very good condition.

Many thanks

The items are all new

 

[kyrano]

Robbi have a look here
https://www.rs-motorcyclesolutions.de/en/fork-protectors-for-bmw-r1200-gs-2004-2012-adventure.html

 

[Slipperyeel]

I've got these fitted. They've gone totally matt after the years and look a bit scruffy but I leave them on because they clearly offer some protection, which I like!

Sent from my SM-G975F using Tapatalk

 

[Robbi]

It shows they work.