Front brake light switch sticking

[scubamouse]

Have found two morning in a row the brake light switch sticking on after riding to work. is there any adjustment or is it just replace?

How hard is it to replace?

Thanks

Mick

 

[Gas'd Off]

Easy to replace Mick ...... but....
I had the same problem and cured it without replacing............... It has a tiny wee screw holding it in place and I found that if I loosened it off half a turn it started working properly again so I just put a tiny blob of thread lock on the screw to hold it in place without being done up so tight it made the light come on. Still working two years later
Hope that makes sense

Edit: Maybe a blob of blue tack or gaffa tape over the screw head would be better than thread thread lock The screw on mine probably won't come out ever now it's effectively glued in place

Double edit: Mine is 1150.

 

[scubamouse]

Thanks for that will have a look tomorrow mine is a 1150 as well so hope that fixes it

 

[(RIP) Bin Ridin]

Squirty squirty WD40 is your friend.