GPS fitting

  • Thread starter Thread starter laughingBob
  • Start date Start date

laughingBob

Guest
I have a Garmin 3+ that I want to fit to the 1200. Do most of you use the auxilliary plug supplied near the bars or hard wire it to the battery.
 
laughingBob said:
I have a Garmin 3+ that I want to fit to the 1200. Do most of you use the auxilliary plug supplied near the bars or hard wire it to the battery.

I hardwired mine to the battery since the plug switches off immediately when I switch off ignition. (not after a 15 min delay as the bike manual says...)
 
Haven't got around to wiring up my GPS 3+, but was pleasantly surprised to get over 25hrs. use from 2300mAh Nimh rechargeable batteries.
 
I also wired mine direct to the battery, and use a RAM mount which is very good indeed.
 


Back
Top Bottom