Help please with a bit of wiring please
- Thread starter slimpickings
- Start date
Are you wanting them on with the high beam or all the time
Personally I would wire them to the side lamps circuit Yellow should go to the grey with a black trace and the black is the ground
You then control them with the switch if the sidelamps are on This also helps setting up camp as you can have them on while you have the parking lights on
if you are wanting them on with the high beam? Just connect the yellow to the high beam positive feed
Personally I would wire them to the side lamps circuit Yellow should go to the grey with a black trace and the black is the ground
You then control them with the switch if the sidelamps are on This also helps setting up camp as you can have them on while you have the parking lights on
if you are wanting them on with the high beam? Just connect the yellow to the high beam positive feed
Deleted account 251024001
Registered user
- Joined
- Oct 6, 2022
- Messages
- 136
- Reaction score
- 82
Is there a light on the switch?
I fecked the switch off, and wired into my dipped beam
Or get a cansmart and feck the switch off again
Or get a cansmart and feck the switch off again
thunderbox....
Yes. a little green one
If you're looking for an ignition live, tap into the fusebox just behind the fuel tank, under the seat. Stays live for a short time after ignition switched off too.
Similar threads
