Help please

[Gvcrt]

I have just bought a Scarla g9 and am trying to connect a zumo 660 and iPhone 4S via Bluetooth I have followed the instructions in the scarla manual but just can't seem to pair the devises I bought the sat nav second hand and didn't get a manual with it so I don't know the default pin I'm sure I am missing something obvious but as I am a techno knob head could anybody please point me in the right direction
Thanks Graeme

 

[beemerboy9]

I don't own either of the devices you mention but here is a link to the manual
http://support.garmin.com/support/manuals/manuals.htm?partNo=010-00727-06&language=en&country=GB

hope this helps,

John

 

[Bugbear]

The pin is 0000
if that helps.

 

[fatbaldbob]

Go to settings on the 660 and make sure the bluetooth is turned on (this is an option you have to select, it will not do it automatically), likewise on your phone. The 660 and phone should then pair, accept and save the settings, the 660 will also import you phonebook.

I think the default pin if not previously changed by the last owner is 1234,

As for the Scala, I havent a clue I use an autocom

 

[Gvcrt]

Thanks guys I will try again tonight
ATB Graeme

 

[moody]

I paired my iphone and Zumo 500 to the Scala. I imagine it must be the same with the 660.
It was quite straightforward.
First you have to pair the phone to the Zumo using bluetooth (code 0000), then pair the Zumo to the Scalarider.
If you struggle you can find the instruction manual here online.

http://www8.garmin.com/manuals/zumo660_OwnersManual.pdf

 

[Grey Beard]

I paired my iphone and Zumo 500 to the Scala. I imagine it must be the same with the 660.
It was quite straightforward.
First you have to pair the phone to the Zumo using bluetooth (code 0000), then pair the Zumo to the Scalarider.
If you struggle you can find the instruction manual here online.

http://www8.garmin.com/manuals/zumo660_OwnersManual.pdf

Just make sure that the phone Bluetooth is set to discoverable mode when you set this up - otherwise you may have difficulties.

Grey Beard

 

[RobertG]

I paired my iphone and Zumo 500 to the Scala. I imagine it must be the same with the 660.
It was quite straightforward.
First you have to pair the phone to the Zumo using bluetooth (code 0000), then pair the Zumo to the Scalarider.
If you struggle you can find the instruction manual here online.

http://www8.garmin.com/manuals/zumo660_OwnersManual.pdf

What he said. Make sure to pair phone to zumo, then pair zumo to scala.

 

[Gvcrt]

Thank everyone for the advise I've now got it sorted
ATB Graeme