How to connect a 2610 to an Autocom Pro 7 sport?

[Andy Hird]

What does the 2610 need to connect it to the Pro 7 sport ?

Cheers,

Andy

 

[Droopy Dick]

You need the 2.5mm to 3.5mm lead.

You'll also need Part 57 (someone is trying to sell one on the site at present).

Plug the lead from the GPS into Socket A on Part 57, and plug Part 57 into the Aux socket on your Pro-rider.

 

[GSrich]

Andy,

You will need the below parts to get you correctly connected,

1x Part 1282 £24 (Twin isolated input adaptor designed for GPS and phone)
1x Part 1294 £5 (2.5mm mono to 3.5mm stereo GPS interface lead)

You will also need a bike power and audio lead if you do not already have one, if not a Part 405 at £35

Rich

 

[Andy Hird]

Andy,

You will need the below parts to get you correctly connected,

1x Part 1282 £24 (Twin isolated input adaptor designed for GPS and phone)
1x Part 1294 £5 (2.5mm mono to 3.5mm stereo GPS interface lead)

You will also need a bike power and audio lead if you do not already have one, if not a Part 405 at £35

Rich

Thanks for the replies guys. Rich part 1294 comes withe the pro 7 sport right ? And I already have part 57, does part 57 do the same job as part 1282 ?

I used part 157 ?? to bike power the pro 7 sport is that right ? if so will i need part 405 ? or does part 405 only power the 2610 ?

Cheers,
Andy

 

[GSrich]

Hi Andy,

Nope, the Pro would of come with a stand phone and music lead but not the 1294 so yeh you will need to buy on. The Part 1282 is the same part as the Part 57 but on its current new part number. Just in case you go into a dealer and ask for a Part 57 you might get a blank look in return lol.

The Part 405 is the Garmin bike power and audio lead, nothing to do with the power to your Pro. The part will be needed to power the 2610 and to allow for the GPS audio to be picked up

hth

Rich

 

[Andy Hird]

Spot on, thanks for all your help Rich

Andy

 

[GSrich]

As always no worries at all

Rich