ilmberger hugger / no instructions

oly

Active member
UKGSer Subscriber
Joined
Nov 6, 2007
Messages
468
Reaction score
4
Location
Cockermouth Cumbria
bought a hugger from wunderlich made by ilmberger?

Came with three bolts and an a4 sheet of german writing!

anyone fitted one of these as it doesnt seem to fit anywhere
 
It's straight forward.

Take off the back wheel.

Offer up hugger.

Take out the three torx screws co responding to the holes in the hugger.

Fit hugger in place- the screws I was supplied with were identical to the originals so ~I re used them with some lock tight.

It'll only fit one way...
 
Try this

Instructions describe alteration in ABS cable/ clamp position

Remove the suspension spring shroud... or remove it, otherwise you will suffer a hole in your new hugger DAMHIKT
:D
 

Attachments


Back
Top Bottom