LED Headlamp

Hoff

Well-known member
UKGSer Subscriber
Joined
Dec 9, 2009
Messages
523
Reaction score
37
Location
Denmead, Hants
I am looking into fitting a LED headlamp unit, not just bulbs, onto my 2008 F650GS.
I have watched several U tube videos and the process seems easy but there is no mention of possible can bus errors.
I know I have to fit an EU legal unit so it will pass the MOT but am wondering if anybody has fitted one and if so were there any problems?
Cheers
Paul
 
Im sure there was a thread on here using an Aliexpress complete unit that when installed didnt error. Have a good look through led threads on here


Here you go

 
Im sure there was a thread on here using an Aliexpress complete unit that when installed didnt error. Have a good look through led threads on here


Here you go

Thank you
 
I've done on eof the aliexpress unit - superb, compared to original. Easy as pie to change, no errors.
 
There are three "generations" of LED headlight available from Ali and other vendors.

The best of the three is the one made by MorSun Technology. It is the one that looks like it has parentheses around the low beam. It will not generate an error and is very well constructed.

And BTW CAN bus has nothing to do with the error. That's a popular misconception. It's the ZFE controller that manages the electrics.
 


Back
Top Bottom