Can anyone tell me where I can source some metal fuel line couplings for my 1150.
Tried Motorworks but they only do plastic ?
Tried Motorworks but they only do plastic ?
Metal Fuel Couplings.
- Thread starter GedJack
- Start date
Fanum
Toubab
Type the title of your thread into Google.......9,800,000 results come up 
then switch to the 'images' view to identify the type you want, and 3.2 seconds later, you'll be there
then switch to the 'images' view to identify the type you want, and 3.2 seconds later, you'll be there
Thanks, sorted by a very helpful forum member.
beemer pimp
Registered user
when you install them, put them opposite way around
so from the tank you have one male and one female
that way it is not possible to connect them the wrong way around
so from the tank you have one male and one female
that way it is not possible to connect them the wrong way around
Thanks for that, top tip.
http://stores.ebay.co.uk/hosesandcouplingsonline/Motorcycle-Fuel-Couplings-/_i.html?_fsub=316885319
That's an e-bay link - bit of digging shows them to be trading as JF Hose & Couplings, Preston 01772 323300...you could even drive there
(You really only need the 'male' connector as it's that bit taking all the stress of being coupled/uncoupled).
That's an e-bay link - bit of digging shows them to be trading as JF Hose & Couplings, Preston 01772 323300...you could even drive there
(You really only need the 'male' connector as it's that bit taking all the stress of being coupled/uncoupled).
http://stores.ebay.co.uk/hosesandcouplingsonline/Motorcycle-Fuel-Couplings-/_i.html?_fsub=316885319
That's an e-bay link - bit of digging shows them to be trading as JF Hose & Couplings, Preston 01772 323300...you could even drive there
(You really only need the 'male' connector as it's that bit taking all the stress of being coupled/uncoupled).
Thanks Jim I've ordered them from this company yesterday.
Good stuff - just had to replace the 'elbow' on mine - had a load of trouble getting the barbed bit from the hose (which then broke inside the hose!). Ended up drilling as much out of the nylon pipe inside the hose then breaking it down/pulling it out/cleaning up.
Similar threads
