Oops, had an off

[ianran]

Hi, I had a slow crash on my CRF1100, as a result it won’t go past 3rd gear.
There is a reset to the DCT, is that likely to solve the problem?

 

[g00ner]

I had an issue with the dct in my 1000. Centre stand, ignition on, spin the rear wheel. Sorted my issue but if you can select 1/2/3 it does sound like you may have a bigger problem

 

[Big Si]

I had an issue with the dct in my 1000. Centre stand, ignition on, spin the rear wheel. Sorted my issue but if you can select 1/2/3 it does sound like you may have a bigger problem

Can you re initialise the dct gearbox on those like you can on the Goldwings? If so, try that, it seems to do the trick.

 

[ianran]

Can you re initialise the dct gearbox on those like you can on the Goldwings? If so, try that, it seems to do the trick.

Thats my first point of call when I can move a bit freer. There is very little damage, the crash bar took the brunt with my leg luckily braking the fall

 

[Big Si]

Thats my first point of call when I can move a bit freer. There is very little damage, the crash bar took the brunt with my leg luckily braking the fall

Get well soon

 

[ianran]

Cheers, had an unrelated finger op last Saturday. Currently, I’m down to only one working leg out of my limbs

 

[ronnie69]

Cheers, had an unrelated finger op last Saturday. Currently, I’m down to only one working leg out of my limbs

Are you typing with your nose?

Good luck with your recovery and re the gear selection thang

 

[ianran]

Brief update, all faults were caused by a dented ABS front ring!
Now working fine, a reminder that kiss is the best policy, Keep it simple stupid!!