paralever drive shaft

[West coast gser]

As I'll be replacing the paralever gaiter do I have to lube the splines on the drive shaft ? what grease do I use? been reading folk use honda 60 moly but done a search on for it and it has been discontinued by honda ..would a normal lith moly cv grease do the job ?
cheers Scott

 

[Massive Lee]

There are many Moly pastes out there. Some have only a few % of Moly. Some have 60% or more. Aim for the top. ;-)

 

[West coast gser]

There are many Moly pastes out there. Some have only a few % of Moly. Some have 60% or more. Aim for the top. ;-)

yeah but would grease with moly do or just moly paste .. ????

 

[warmshed]

I use this OPTIMOL T WHITE PASTE, https://www.motobins.co.uk/displayfinal.php?q=Optimol Paste&s=0 Used it on my K1200rs too. Buy a tube it lasts for ages.

 

[West coast gser]

I use this OPTIMOL T WHITE PASTE, https://www.motobins.co.uk/displayfinal.php?q=Optimol Paste&s=0 Used it on my K1200rs too. Buy a tube it lasts for ages.

Out of stock ...

 

[nick.ct]

Take your pick

http://www.ebay.co.uk/sch/i.html?_o...+cv+grease.TRS0&_nkw=joint+cv+grease&_sacat=0

 

[West coast gser]

Take your pick

http://www.ebay.co.uk/sch/i.html?_o...+cv+grease.TRS0&_nkw=joint+cv+grease&_sacat=0

 

[warmshed]

Lots of lithium/moly grease around but is it the correct lube? The recommended one is available from here, https://www.silmid.com/products/optimot100-castrol-optimol-paste-white-t-100gm.aspx 25 day lead time but if you contact castrol they will tell you a stockist.

 

[beemer pimp]

Optimol
+1

http://www.motorworks.co.uk/vlive/Shop/Parts.php?T=4&NU=15&M=30&Ct=VG

 

[(RIP) trickytree]

Some HERE

Split a tin 10 or 20 ways if there's enough interest....I'll do it but will have to wait till pay day at the end of the month. They do 100g tubes as well in packs of 20.