Here's what the web site say's 
About the Power FRK ModulePlug ‘n Play Faster & Smoother!
True Motorcycle Enthusiasts have always demanded increased performance and smoothness from their engines. They want an optimally performing motorcycle at all throttle positions with excellent torque delivery throughout the entire RPM range. From idle to red-line, the Power FRK Module is a perfect Plug ‘n Play tuning device for your stock or modified motorcycle – It never has to be adjusted or remapped if performance enhancing modifications are added to your Motorcycle or if you go back to stock configuration!
We Guarantee an Optimal Tuning Solution!
Years of development and testing have resulted in a high-tech electronic module engineered to optimize the on-board Fuel and Ignition mapping at all RPMs and Throttle Positions automatically.
The Power FRK Module can not be detected by the manufacture’s diagnostic equipment and can easily be removed and the ECU will revert to normal operation.. There are no fault codes generated upon installation or removal of the Power FRK Module.
Plug ‘N Play – Power it UP!
The Power FRK Module is for motorcycle enthusiasts who want a robust running motorcycle at all RPMs. From a strong idle to redline NO Flat Spots – NO choppy throttle and NO lean burn backfiring. Gone are the days of installing outdated piggyback ECU signal optimizers – products that have to be dyno-tuned for hours and not have the superlative results that the Power FRK offers!
Piggy Back units can’t compare with the Power FRK’s direct dynamic signal into the ECU and the subject motorcycle will perform significantly better than with any other piggyback tuning device – even after hours of dyno-tuning! Piggyback units have a signal delay of 8 to 23 microseconds and require an experienced “Tuner”! That is expensive and the accuracy of the signal turnaround is always delayed. Using canned maps from the piggyback manufacturer are known as “starter maps” and they still require experienced fine tuning. After Tuning they follow the static map overriding the excellent on-board OEM mapping.
The Power FRK Module Does Not Need ANY Expensive Dyno-Tuning!
We offer a Powerful quick to install solution at a great price point!
The Power FRK Modules are for:
•Completely Stock motorcycles with stock catalytic converter/headers and performance Slip-On and with stock or performance air-filter
•Fully modified motorcycles with Full exhaust systems (without catalytic converter) and with stock or performance air-filter
Smooth Power Delivery
The Power FRK will detect RPM and Load as you open the throttle. It will work perfectly with a stock or a modified motorcycle. As performance modifications are added at a later time the Power FRK Module will provide the correct optimal on-board fueling and ignition mapping as detected by the additional demand of air. This will give you increased smooth linear performance and smooth throttle response with NO flat-spots or choppy throttle at any RPM.
Open the throttle with a Power FRK equipped motorcycle and you will feel the smooth linear power! The Power FRK always calls up the on-board mapping at an optimal level for best performance.
The Power FRK Module works as follows:
•It detects and interprets the engine RPMs by the alternator’s sine wave pulsing in the power supply to the IAT sensor
•It interprets the rush of air as you open the throttle using the IAT sensor’s variant signal. This is how we determine load.
•Using the above two variants the Power FRK Module will modify the IAT signal to call up on-board mapping in the optimal performance range based on the demand of the rush of air into the air box and the corresponding RPM.
•THE POWER FRK detects the engine revolutions and the Power FRK comes into operation only when the engine revolutions increase. The Power FRK Module senses the RPM and Pressure changes in the air-box and automatically modifies the signal of the IAT sensor on acceleration only for maximum power.
•As engine revolutions decrease and you are running at constant speed (Steady State) the Power FRK Module stops its IAT signal modulation. Your ECU will return to normal programming and will also allow the ECU to go into “Closed Loop Operation” mode when riding Steady State Mode.
Powerful Performance with better MPG/KPL as the combustion efficiency is enhanced by excellent flame front propagation from optimal Injection and Ignition mapping.
I've ordered this one for mine
Power FRK Module 2 for the BMW HP2 - (1027BR12002)
Application: Modified BMW R1200 Series Motorcycles with full performance exhaust systems (NO catalytic converter) with stock or free flowing performance air filters. The Power FRK #2 is for racing only! Smooth and powerful with no flat spots!
Simple yes
well lets find out 
when it arrives and turns out to be a pup it goes back to the USA 
quote •We guarantee a positive experience 100% of the time or you can return it for a full refund!
Cambridge Motorcycles (01223-360176) co-owner and Head Tuner David 'Spike' Abrahams. A tuning guru with a dyno shop!! ex-drag racer, and engine builder, and Prudie race engine builder and road bike tuner. Likes power commanders and carbs
.
'FRK yer right, stick it on the dyno lets see what it does, you can send the FRK'in thing back cause it's bound to be shit'
SO DOES THE FRK WALK THE WALK AND TALK THE TALK
What do you all think?
About the Power FRK ModulePlug ‘n Play Faster & Smoother!
True Motorcycle Enthusiasts have always demanded increased performance and smoothness from their engines. They want an optimally performing motorcycle at all throttle positions with excellent torque delivery throughout the entire RPM range. From idle to red-line, the Power FRK Module is a perfect Plug ‘n Play tuning device for your stock or modified motorcycle – It never has to be adjusted or remapped if performance enhancing modifications are added to your Motorcycle or if you go back to stock configuration!
We Guarantee an Optimal Tuning Solution!
Years of development and testing have resulted in a high-tech electronic module engineered to optimize the on-board Fuel and Ignition mapping at all RPMs and Throttle Positions automatically.
The Power FRK Module can not be detected by the manufacture’s diagnostic equipment and can easily be removed and the ECU will revert to normal operation.. There are no fault codes generated upon installation or removal of the Power FRK Module.
Plug ‘N Play – Power it UP!
The Power FRK Module is for motorcycle enthusiasts who want a robust running motorcycle at all RPMs. From a strong idle to redline NO Flat Spots – NO choppy throttle and NO lean burn backfiring. Gone are the days of installing outdated piggyback ECU signal optimizers – products that have to be dyno-tuned for hours and not have the superlative results that the Power FRK offers!
Piggy Back units can’t compare with the Power FRK’s direct dynamic signal into the ECU and the subject motorcycle will perform significantly better than with any other piggyback tuning device – even after hours of dyno-tuning! Piggyback units have a signal delay of 8 to 23 microseconds and require an experienced “Tuner”! That is expensive and the accuracy of the signal turnaround is always delayed. Using canned maps from the piggyback manufacturer are known as “starter maps” and they still require experienced fine tuning. After Tuning they follow the static map overriding the excellent on-board OEM mapping.
The Power FRK Module Does Not Need ANY Expensive Dyno-Tuning!
We offer a Powerful quick to install solution at a great price point!
The Power FRK Modules are for:
•Completely Stock motorcycles with stock catalytic converter/headers and performance Slip-On and with stock or performance air-filter
•Fully modified motorcycles with Full exhaust systems (without catalytic converter) and with stock or performance air-filter
Smooth Power Delivery
The Power FRK will detect RPM and Load as you open the throttle. It will work perfectly with a stock or a modified motorcycle. As performance modifications are added at a later time the Power FRK Module will provide the correct optimal on-board fueling and ignition mapping as detected by the additional demand of air. This will give you increased smooth linear performance and smooth throttle response with NO flat-spots or choppy throttle at any RPM.
Open the throttle with a Power FRK equipped motorcycle and you will feel the smooth linear power! The Power FRK always calls up the on-board mapping at an optimal level for best performance.
The Power FRK Module works as follows:
•It detects and interprets the engine RPMs by the alternator’s sine wave pulsing in the power supply to the IAT sensor
•It interprets the rush of air as you open the throttle using the IAT sensor’s variant signal. This is how we determine load.
•Using the above two variants the Power FRK Module will modify the IAT signal to call up on-board mapping in the optimal performance range based on the demand of the rush of air into the air box and the corresponding RPM.
•THE POWER FRK detects the engine revolutions and the Power FRK comes into operation only when the engine revolutions increase. The Power FRK Module senses the RPM and Pressure changes in the air-box and automatically modifies the signal of the IAT sensor on acceleration only for maximum power.
•As engine revolutions decrease and you are running at constant speed (Steady State) the Power FRK Module stops its IAT signal modulation. Your ECU will return to normal programming and will also allow the ECU to go into “Closed Loop Operation” mode when riding Steady State Mode.
Powerful Performance with better MPG/KPL as the combustion efficiency is enhanced by excellent flame front propagation from optimal Injection and Ignition mapping.
I've ordered this one for mine
Power FRK Module 2 for the BMW HP2 - (1027BR12002)
Application: Modified BMW R1200 Series Motorcycles with full performance exhaust systems (NO catalytic converter) with stock or free flowing performance air filters. The Power FRK #2 is for racing only! Smooth and powerful with no flat spots!
Simple yes
well lets find out when it arrives and turns out to be a pup it goes back to the USA quote •We guarantee a positive experience 100% of the time or you can return it for a full refund!
Cambridge Motorcycles (01223-360176) co-owner and Head Tuner David 'Spike' Abrahams. A tuning guru with a dyno shop!! ex-drag racer, and engine builder, and Prudie race engine builder and road bike tuner. Likes power commanders and carbs
. 'FRK yer right, stick it on the dyno lets see what it does, you can send the FRK'in thing back cause it's bound to be shit'
SO DOES THE FRK WALK THE WALK AND TALK THE TALK
What do you all think?
NO HP INSTRUCTIONS ON THIER WEB PAGE EITHER
the plus is that it’s not detectable when it’s been removed, a big plus if you still have BMW warranty and remember to remove it 
and not BMW detectable 
