Quest Mount for 1200GS

[craig614]

Sorry for being a bit thick here but can anyone tell me what I need to order for mounting a quest to an 1200GS and where about the best place to mount it is? Looked through the threads - seem to remember about a deal for all the kit together but can't find it.
Thanks in advance
Craig

 

[Stoney]

This is my set-up (as recommended b y the RAM-MAN - with one alteration) and IMHO it works really well. Loads better than putting on the handlebars (why do people do that?)

The RAM-MAN will give you the part numbers if you ring the GPS-Warehouse
The bits I use are:
A metal u bolt with a ram ball/mount
A plastic u spacer
Ram arm
Audio/power pack (hard-wired is much neater than the removable alternative that is available - it would be better if they fitted the wires with o-rings as they come bare)
Ram Quest cradle

With this set-up the screen is easy to see, fits with my screen (sedcem) it the tilted back position, stays put and is protected from the elements. You can also loosen the arm to get behind it to clean the screen with no problems.

 

[Big Lee]

Yep, same place for my 2610 too. Ideal just to glance down at.

 

[MiGSel]

I now have a more elegant solution for the "RAM ball up there"



This mount goes on top of the metal plate between the speedo and the screen.

And you can mount up the 3 devices.

It will be available soon from my brand new webshop

Cheers,
Michel

 

[Stoney]

I now have a more elegant solution for the "RAM ball up there"



This mount goes on top of the metal plate between the speedo and the screen.

And you can mount up the 3 devices.

It will be available soon from my brand new webshop

Cheers,
Michel

You can put me down for one of those Michel!

 

[Big Lee]

They look very good how much?

 

[jimswms]

I now have a more elegant solution for the "RAM ball up there"



This mount goes on top of the metal plate between the speedo and the screen.

And you can mount up the 3 devices.

It will be available soon from my brand new webshop

Cheers,
Michel

Michel,
I want one! Do you ship to us?

 

[MiGSel]

They will be ready by the end of the week and it will be 85 euros all included.

I hope to get the webshop ready for launch in a few days!

Where is Providence, RI Jim? USA I suppose?
Not that it matters much, I'll send them anywhere
In fact one of the first 3 is in the USA already and another one in Canada.

Cheers,
Michel