R100GS favour required...

barak666

Well-known member
UKGSer Subscriber
Joined
Jan 19, 2016
Messages
1,203
Reaction score
69
Location
Northampton
I'm looking for some info....I need to know the size of the stem nut/top yoke nut on the R100GS. If someone could measure the nut across the points of the nut - this is the diameter of the nut at its widest point and let me know the size I'd be very grateful.

Thanks in anticipation.
 
I'm looking for some info....I need to know the size of the stem nut/top yoke nut on the R100GS. If someone could measure the nut across the points of the nut - this is the diameter of the nut at its widest point and let me know the size I'd be very grateful.

Thanks in anticipation.
Hi Barak - I've just measured the nut on my 1990 R100GS and it appears to be exactly 2 cm across the points. In fact somewhat smaller than I imagined.

dave/Kingston
 
Hi Barak - I've just measured the nut on my 1990 R100GS and it appears to be exactly 2 cm across the points. In fact somewhat smaller than I imagined.

dave/Kingston
Many thanks, Dave...that is certainly smaller than I anticipated....expected something larger. Thanks again.
 
And the large nut underneath is 33 mm. Perhaps you originally meant that one.
dave
I didn't realise there were two nuts...I assumed it would be something similar to the image below...

Phil
 

Attachments

  • 00B0B_4rcnuL4Nx0X_0CI0t2_1200x900.jpg
    00B0B_4rcnuL4Nx0X_0CI0t2_1200x900.jpg
    165.1 KB · Views: 42
Thanks again....looking at this other image I've found it certainly appears to be the larger nut size.
 

Attachments

  • 1100029147.jpg
    1100029147.jpg
    498.3 KB · Views: 38
The top nut on my 89 is 36mm. It changed on later models 90/91?
 
Hi Phil, Realoem parts list shows the difference between early and late bikes but doesn’t state the size:





View attachment 332732



View attachment 332733

Many thanks, Gerry....appreciate the info. (y)
 


Back
Top Bottom