Thanks mate that's very encouraging. I think if it get's really difficult you can also get the panniers with locks instead of central lock, that would potentially short cut some of the issues with the loom & coding. I am not planing going down that route especially with your feedback. I will post how I go and hopefully soon have something positive to contribute about owning & riding a Perform RS in Aust.No reason. My bike also had a built date of June 2025. So as long as EU and OZ market builds are the same spec. There should be no issues.
When I bought the bike the dealer told me it wasnt straightforward. But maybe they mean its not as simple as pre installed bikes. I believe the extra hassle was changing coding to allow the central locking to work. As essentially they have to change the build spec of the chassis. Then have factory servers confirm and accept. Then the send the coding to the bike. Its not like the old days where they csn manually just change a measure block . The actual data card of the bike needs to change. I think this is what creates the issues.
For parts I believe it is a partial loom, plus the side connection points etc.
One thing yo add also. With the Performance model suspension there are no issues either. It has range to adapt and even with panniers loaded the bike compensates and in Dynamic with load it actually feels better sometimes. Maybe because the load forces it to really jack itself up and add alot more support.
I know for sure there was a dealer in UK who has a demo with panniers installed also. So for sure it is possible.
Itd mainly BMW red tape. Ad the V max etc and rated subframe loads need to change with panniers etc. You know how the world is. Someone somewhere will fully load the bike with a 18 stone passenger plus full panniers and do a V max run . The bike will have a speed wobble or crack a subframe or something and they will claim BMW.
Well you certainly put a few miles on that 1300. Bravo. I only have 7500 miles on my 1250. But that keeps it more interesting for resale, which prolly won't happen anyway as I paid too much for it. I have a GS in the garage and it gets a lot of the miles these days. I like the RS better, it really is a great performer, but i do tend to ride it rather spirited at times so I just get it out for special occasions it seems. Like having a 9/11 turbo in the garage, you don't drive it all the time. I'm more likely to survive on the 1250 GS as it is. I just put around bike, but still has the get up and go under the hood. Let us know what you end up with ... I can say that after riding the GS for a spell I do really enjoy the RS for an afternoon .....To close this thread. Bike is sold.
If anyone is interested to buy it. It's gone to a bike seller in Málaga . If I find the listing I'll post it.
Bike just had 20k service and new Continental Sportcontact 5 fitted today and goes directly to the shop for sale.
Its been great. Loved the bike. But things are changing. 20k in 7 months is going to make it worth nothing in a few years. So jumped now.
Also. The capability of the bike is just overkill for what I need now. Have no spare time so I'm just going too hard on the commute and want something slower and more fun. I'm taking a bit of abuse for this but...... tested a Moto Guzzi Stelvio and loved it. Bike isn't perfect but it has something. Fun, comfortable but great to ride at a much slower speed. So went for the Duecento Tributo model. I have a thread in the Guzzi section and will keep that updated.
Thanks mate that's very encouraging. I think if it get's really difficult you can also get the panniers with locks instead of central lock, that would potentially short cut some of the issues with the loom & coding. I am not planing going down that route especially with your feedback. I will post how I go and hopefully soon have something positive to contribute about owning & riding a Perform RS in Aust.





Looks great. Nice touches. I especially like the black in the tank next to the seat.
Glad you got it all sorted.
Fagan did a track day on one and rated it. It was on the Mk3 Dunlops too so to Mk4 would have helped a bit more as for sure they are an improvement and really suit the bike.


Yes i found they were decent in the wet. The thing is. Really nobody can rate road tyres being ridden on the road in the wet as its all down to the asphalt. There are so many variables that affect grip that there are lots of tyres that are decent.
As you know, if you're smooth and progressive with inputs and can hold some heat in the tyre. Most things work. The 3 were good. I rode them all winter. But the 4 were just better overall.
The Mk4 really suit the bike. Michelins for me have always been a poor tyre overall. They work but have a window. Take them out that window and they fall off a cliff. Its been been the same with their race tyre and road tyres. Road 6 was one of a vaguest road tyres I tried. Only the Metzler Roadtec 01 was worse. But everyone buys them like everyone buys GS's. Theyre decent enough for 80%of riders are use. Saying that I currently have Anakee Adventure on the Stelvio and still getting 50deg lean on the logger and 6% rear wheel overspeed. So really every tyre is capable is you load it gently enough.
Before I sold the bike i took it for service and installed Continental Sportcontact 5. Then rode it 60km directly to the buyer with my 12 year old daughter on the back. From what i could gather they were good, felt a great and frint felt a bit slower and not as sharp as Dunlop but more positive. But i think they might be too soft. This is that tyre after that 60km journey.
The Dunlops took alot of abuse and didnt fall apart. The Continental i think will be lile Bridgestone. Fall apart . Great for the car park guys who want to talk about tyres. But bad for wallet and guys who want the tyre to perform
View attachment 549406View attachment 549407