Spot lights on 1200GSA

[patzx12]

This is the spotlight setup I manufactured for my GSA.
The lights are cheap and cheerfull RING lights from my local autoparts shop.
I wired them through a relay, fitted a small waterproof toggle switch.
And powewed the relay from thr starter relay under the seat. They come on with the ignition when the starter toggle on the right handlebar switch is in the middle.
Light performance is good and gives the bike a good road presence.

 

[Johnny Boy]

Spot Lights on 1200GSA

Hi Pat,

Interesting addition.How did you mount the lights to the crashbar , any chance of a close up picture

Cheers

John

 

[patzx12]

I removed the bar and welded 2 stainless steel posts to it, I had a fixture to hold the posts in position while I welded them, I could not be doing with a load of brackets.
I laser cut and bent the covers.

 

[Attleborough]

I removed the bar and welded 2 stainless steel posts to it, I had a fixture to hold the posts in position while I welded them, I could not be doing with a load of brackets.
I laser cut and bent the covers.

You could try your luck in the vendors of innovations section if you're inclined!