SPOTLAMP FITTING

[timtim]

I am planning to fit a set of upper and lower crash bars to my 2010 1200GS.
They are the S W Motech ones.
At the moment i have a pair of BMW spots fitted, using the std plastic brackets, but i will have to remove these if i fit the upper bars.
Any suggestions anyone please.
The GSA bars have brackets already welded to the upper bars, but i need to see hoe the lights will fit with the Motech ones.
Any help much appreciated.

 

[ducatiparts.110mb]

post some pics of your current setup and the new bars without lights so that we can see what you're talking about

 

[swissrob]

you will regret the upper bars.... they are poorly designed.

the U bolts take ages to install/remove and they touch the oil line to the cooler

 

[stevie Allen]

On the last if you want to take the side panels off the top bars are a pain in the arse so get all your wiring done and run first.

you will regret the upper bars.... they are poorly designed.

the U bolts take ages to install/remove and they touch the oil line to the cooler

 

[timtim]

Hmmm... Story of my life !
Looks like they'll be up on the old fleabay if anyone is interested
Thanks for your input fellas.

 

[jontym]

you will regret the upper bars.... they are poorly designed.

the U bolts take ages to install/remove and they touch the oil line to the cooler

Fitted heavy duty plastic cable cleats top and bottom, two minute job to remove/refit,also waterproof sockets on the wiring.

 

[rudiemoto]

you will regret the upper bars.... they are poorly designed.

the U bolts take ages to install/remove and they touch the oil line to the cooler

hi swissrob
yes ,but now i take beak off 10 min job
beak on 1 hour

but
food makes me faster