Moved my R1200GS this morning and this was on the floor. Can’t seem to locate where it’s from on the bike. 15mm long 3mm diameter with a PH1 c/s head.
Any ideas?
Starter for 10
- Thread starter Spook1969
- Start date
Moved my R1200GS this morning and this was on the floor. Can’t seem to locate where it’s from on the bike. 15mm long 3mm diameter with a PH1 c/s head.
Any ideas?
Side stand / centre stand pivot bolt
and by the look of it it wasnt screwed in properly as the threadlock looks intact
so it could be a dropped bolt from previous rework that wasnt found
and by the look of it it wasnt screwed in properly as the threadlock looks intact
so it could be a dropped bolt from previous rework that wasnt found
Can’t see where it would fit there? It’s a very small bolt
It looks like a bolt for the brake reservoir cap on the bars but too long; have you an old eighties classic in the garage you've been working on.
Only a 2018 R9T Urban and the 2017 GS.
The brake reservoir bolts are silver and much bigger.
The brake reservoir bolts are silver and much bigger.
Thought it might be something to do with the Nav but nothing missing there.
Can’t find it anywhere?
Can’t find it anywhere?
- Joined
- Nov 5, 2015
- Messages
- 13,116
- Reaction score
- 5,103
Almost everything on a GS (LC at least) is torx, do you have any aftermarket stuff on it ?
Yes but nothing that small.
It looks electrical but I can’t see where.
It looks electrical but I can’t see where.
Is it metal or plastic?
Metal
Switchgear or brake lever/microswitch ?
Similar threads
