bikes done 5.5k, when coasting in 5-6th gear at a steady 2.5 to 3000rpm and gently rolling the throttle on and off you can feel the engine grinding through the bars and pegs, very unpleasant and it sounds like a bag of spanners any ideas?


bikes done 5.5k, when coasting in 5-6th gear at a steady 2.5 to 3000rpm and gently rolling the throttle on and off you can feel the engine grinding through the bars and pegs, very unpleasant and it sounds like a bag of spanners any ideas?![]()
They all do that too sir...
( welcome to the world of the wet clutch )

They all do that too sir...
( welcome to the world of the wet clutch )


The wet clutch on my Honda XR250R doesn't do that and it snicks into gear like a good'un
No clunks or clanks
A finer gearbox would be harder to find and certainly far superior to the 6 speed one fitter to the 12GS WC
I can't understand how BMW could get it so very wrong
My 1200GS 09 model gearbox varies from rubbish to so slick depending on the weather?
I can have a good ride out on fast sweeping bends and the box is sooo slick.
Next day I can do two up ride on back lanes and every change has a clunk, with surging on the throttle at 2500 to 3000. How can a gear box so good one day be so bad the next? Its not good and after so any different bikes without this problem I cannot excuse BMW.