Tank pad fitting

[jazzmanb]

bought a couple of pads from motoworks for my r100.i take it they just glue on..any stuff better than others?...thanks tom

 

[Rob Farmer]

Clear Silicone works for me.

 

[Beemerboff]

Just get it clean first - wax and grease remover wiped off with a white tissue until clean.

Then put a couple of bits of masking tape to set the position, remove the backer and fix them as quickly as possible.

 

[jazzmanb]

Just get it clean first - wax and grease remover wiped off with a white tissue until clean.

Then put a couple of bits of masking tape to set the position, remove the backer and fix them as quickly as possible.

they have no backer on them just plain rubber.

 

[Beemerboff]

Funny - the one I fitted were self adhesive.

Sikaslex 272 black " silicone" is a strong commercial grade adhesive.

Use a few bits of thin double sided tape to act as a spacer and hold the pad while the adhesive cures.