Tech help please.

  • Thread starter Thread starter rgh999
  • Start date Start date

rgh999

Guest
Summary as follows

Zumo 550
Nokia 5800 Express
Autocom kit 300 pro rider with Bluetooth dongle in Aux 1 and gps wire to Zumo from Aux 2

1. Nokia paired direct to autocom, Zumo switched off,and no problem with audio or microphone on headset.

2. Autocom not paired to Zumo, Nokia paired to Zumo. Audio on phone works and all phone functions operate. Obviously no voice as headset is only wired in and not paired for microphone. Normal volumes. Can ring out and hear person at other end.GPS and music work fine

3. Nokia paired to Zumo and Zumo paired to Autocom headset. Zumo setting on audio to Bluetooth phone only. As soon as i make a call the phone symbol appears but I have no audio other than a few odd sounds (feedback?) The call gets through to the other person but I cant hear them and they cant hear me. If I disconnect via zumo sometimes the phone connection then drops out.

4. When Nokia is paired to Zumo and Zumo to Autocom and the Zumo is set to Bluetooth phone only, the GPS and music volume is perfect as it comes through the wired connection. If I change to GPS/Music and phone through Bluetooth the audio drops by about 90% and with interference. And of course I cant hear the audio or be heard although the phone does connect.

All very confusing . I have tried a nokia n95 which used to work fine with this set up but that also has developed the same problem. As soon as I pair the Zumo to the Autocom things start to go wrong.
The impression I get is that everything is fine until the Bluetooth microphone comes into play.
Anyone any ideas. Garmin tell me that the 5800 should be compatible with the Zumo.
 
Any update?

just got myself a 550.
pairs fine with nokia 5800, re-pairs ok, address book downloads.
you can make an outgoing call, but when call connects silence on both sides of call.
paired the zumo with my old n73, works fine, so not the zumo or the headset.

On the 5800 i noticed that the zumo is treated as a car kit, not a headset as with the n73. as far as i can work out you can't change any settings for the carkit connection on the 5800, this appears to be the problem.

does anyone know how to change the settings or to make the zumo connect as a headset?
has anyone been using a 5800 with the 550?

Thanks
 


Back
Top Bottom