Throttle Grip Too Small

[Stuttgartmetal]

My Handgrips on the 1200 is far smaller in diameter than on my GS1150
So much so that my hands are going numb
Anyone had this problem, and what's the fix
Thanks in advance

 

[Tarka]

and what's the fix

Put larger diameter grips on.

 

[DrAlf]

Grip puppies would be an easy, quick and cheap solution

 

[oblertone]

+1 for Grip Puppies; and despite your cubic capacity, you only need the smaller ones !

 

[kevingambrell]

Grip puppies solved the same problem for me

 

[AustinW]

Grip puppies solved the same problem for me

+1

 

[Deleted account 240901001]

Cut all the fingers and thumb of your right hand off with a pair of bolt cropper at the first knuckle.....you may need help with this......

 

[kettle738]

Same for me......can't stand skinny grips.......grip puppies do the job, cheap and simple to fit.

 

[kevingambrell]

Cut all the fingers and thumb of your right hand off with a pair of bolt cropper at the first knuckle.....you may need help with this......

God your primative! we live in the new world we have circular saws for jobs like that!

 

[oddshapedballs]

I found grip buddies better than the puppies - neoprene and wrap around fit.

http://www.originalbeemerbuddies.com/gallery.html

 

[Bendy toy]

I found grip puppies were too fat.

I used some 3mm Sorbothane sheet (get the softest grade you can). Cut to fit around the grip and cover with snooker cue heat shrink sleeve. Sobothane absorbs vibrations and the job adds about 8mm to the grip diameter.

Soft Sorbothane. Arrange the joint to the front of the grip so you wont notice the ridge. On right side, open throttle to its normal setting and arrange the joint on the opposite under side from your hand contact.
http://www.ebay.co.uk/itm/Sorbothane-Sheet-/301664846388?hash=item463ca04234:g:bb0AAOxy0x1TVpcs

Snooker cue sleeve - Get a size that will just go over the hand grip end flange. It heat shrinks to fit.
http://www.ebay.co.uk/itm/Snooker-P...hash=item4889fbe6e5:m:mo00yiPM2xkmxO3vHeN8bqA