Tickover speed

[RichGSer]

I had my 1150GS serviced (24000miles 0uch£££) in Coopers Tonbridge Wells and tickover speed is about 1400rpm when warm. I think this is too high. Can I adjust each injector accurately without the balancing tool?Or, is there an easy way?

 

[pablo666]

IMHO after reading a lot about throttle body balancing and doing me own. You will need some sort of balancing device to start adjusting anything

However, if you know that they are already in balance, someone better than me may have a method for adjusting the idle without affecting the balance

 

[D6]

just take it back if its local and u aint sure, they set it too high
you can turn both screws down the same, should be ok, but a balencer is the best bet

 

[Steptoe]

Take it back, it cost you enough.

But in the meantime, turn the brass screw each side IN a half a turn at a time to get the idle that you prefer.

It won't do any harm.