Does anyone have a solution for putting a volume control on my handle bar? Have an autocom mated to a 550 and find it a bit fiddly clicking through the Garmin to get to the volume. Ideally if it came with an optional PTT switch I'd be delighted as I find the vox control kicks in an kills the music on windy days.
Volume control for autocom
- Thread starter caribcat
- Start date
1) How long have you had this volume problem?
Are you using the bottom button on the unit to access the master volume control to adjust the volume?
Some Autocom units have an ambient noise detection function that will increase volume automatically. Sam at Chainspeed will sell you any bits that you need if they are suitable for your unit.
2) A PTT switch has nothing to do with the VOX control. You need to set the VOX "harder" (more difficult to speak) if you find the wind blast opening the microphone.
Hope this helps
John
Are you using the bottom button on the unit to access the master volume control to adjust the volume?
Some Autocom units have an ambient noise detection function that will increase volume automatically. Sam at Chainspeed will sell you any bits that you need if they are suitable for your unit.
2) A PTT switch has nothing to do with the VOX control. You need to set the VOX "harder" (more difficult to speak) if you find the wind blast opening the microphone.
Hope this helps
John
I use an Ampli-Rider, it also boost imput signals and improves the sound quality noticeably. It has 3 inputs going to one output so you can boost / control 3 devices.
Some pics here:-
http://www.ukgser.com/forums/showthread.php?t=267749
And you get them from this chap:-
http://www.electric-avenues.com/amplirider.html
Some pics here:-
http://www.ukgser.com/forums/showthread.php?t=267749
And you get them from this chap:-
http://www.electric-avenues.com/amplirider.html
Similar threads
