Anyone recommend after market pegs for PD ?
The OE ones aren't the best comfort wise, to narrow.
Black would look good as well.
The OE ones aren't the best comfort wise, to narrow.
Black would look good as well.
Wider foot pegs
- Thread starter Captain Black
- Start date
Ive these fitted to both of mine. But like anything there's a compromise. To get the gear change to work properly the threaded adjuster is right on the limit
That's the sort of peg, the OE is crap.
Why the big deal with the gear change ? Those pegs are how much further back ?
Why the big deal with the gear change ? Those pegs are how much further back ?
solidstate100
Registered user
I have the same ones - they are further back AND lower so the gearchange (and brake lever on mine as well) needs to be adjusted....
Perhaps you should start yet another thread about having telescopic feet
I'm enjoying myself chatting airhead stuff.
Beemerboff
Registered user
I have $15- Parts Unlimited Yamaha YZ Wide pegs on mine and they do the job.
They slide straight in to the mount but the pivot bolt, stop and spring stops need to be hacked around a bit. An hour or two with a drill, hacksaw and file should be ample.
There is nothing that special about the width and angle of the OEM pegs so there are probably a few others that can be made to ft too.
They slide straight in to the mount but the pivot bolt, stop and spring stops need to be hacked around a bit. An hour or two with a drill, hacksaw and file should be ample.
There is nothing that special about the width and angle of the OEM pegs so there are probably a few others that can be made to ft too.
I'm thinking of these: Ebay 401120908624. Not particularly cheap
Q-tech do these: Ebay 291752445816. Cheaper.
Q-tech do these: Ebay 291752445816. Cheaper.
solidstate100
Registered user
Beemerboff
Registered user
http://www.ebay.com.au/itm/Racing-F...110584?hash=item1a09b695f8:g:Jv4AAOSwys5WWArd
These could probably be made to fit,but the fact that the vendor doesn't know which way is up is a bit off putting
These could probably be made to fit,but the fact that the vendor doesn't know which way is up is a bit off putting
Beemerboff
Registered user
Not many kids ride WR 500 s .
These red numbers alongside the dimension lines with mm after them are actually the sizes in thousands of a metre, and at 80 x 50 the foot pad is similar to most
aftermarket wide rests.
These red numbers alongside the dimension lines with mm after them are actually the sizes in thousands of a metre, and at 80 x 50 the foot pad is similar to most
aftermarket wide rests.
Don't fastway make them to fit ?
Love them on my GSA 1150
Love them on my GSA 1150
I'm pretty sure they are but cannot give you a confirmed answer
Just done a check on realoem. Looks like they're unique to the airheads http://www.realoem.com/bmw/enUS/par...S_PD&mg=46&sg=71&diagId=46_0167&q=46711451573
Just done a check on realoem. Looks like they're unique to the airheads http://www.realoem.com/bmw/enUS/par...S_PD&mg=46&sg=71&diagId=46_0167&q=46711451573
Similar threads
