Fitted my Aoocci to Voge 900 today.
All straightforward apart from taking the bike to bits and learning on the job about using a piggy back fuse to source an ignition feed.
My Chigee unit on Himalayan has both positive and negative connectors to the battery and an ACC wire to tap into an ignition feed.
But the Aoocci only has negative to battery then positive to an ignition feed.

I chose the lighting circuit fuse , having tested it to make sure it was switched to the ignition.
Then used a piggy back fuse thingy


Took my time with the wiring feed and then fitted the cameras and leads.




Got to set up the wifi link yet and format the sd card for recording but very pleased with the unit .
Bargain at £136 !
All straightforward apart from taking the bike to bits and learning on the job about using a piggy back fuse to source an ignition feed.
My Chigee unit on Himalayan has both positive and negative connectors to the battery and an ACC wire to tap into an ignition feed.
But the Aoocci only has negative to battery then positive to an ignition feed.

I chose the lighting circuit fuse , having tested it to make sure it was switched to the ignition.
Then used a piggy back fuse thingy


Took my time with the wiring feed and then fitted the cameras and leads.




Got to set up the wifi link yet and format the sd card for recording but very pleased with the unit .
Bargain at £136 !




