Bought a Stelvio

[Cortina]

I know technically it should work but know nothing about the dealer.(memory like a goldfish)

Barry

Forget the technical ... I made contact , asked the question , and got a positive response.
I also test drove a new one a few weeks ago - and apart from bits about to fall off the 300 mile old ? bike (embarassing for dealer)... I liked it . Suspect one is in my future once I have a house move behind me and life settles down again. It will be a luggaged up yellow one , and I would say £10K will buy one and as usual will be a trip to mainland to get it.

 

[Smartbazza]

Forget the technical ... I made contact , asked the question , and got a positive response.
I also test drove a new one a few weeks ago - and apart from bits about to fall off the 300 mile old ? bike (embarassing for dealer)... I liked it . Suspect one is in my future once I have a house move behind me and life settles down again. It will be a luggaged up yellow one , and I would say £10K will buy one and as usual will be a trip to mainland to get it.

I regularly see a chap on the North coast on a Rwb one and would love to getting chatting to him about dealers and service as I suspect he got it elsewhere.

Barry

 

[Neil W]

Took mine out for a run the other day , did about 130 miles but with the factory supplied panniers in place .

I'm glad they were free with the bike but my god they are rather iffy quality wise , the fixing method is rather Micky Mouse (supplying dealer said a couple of their customers have lost a pannier and the rear seat ) and they are far from secure once fitted and would be easily broken into .

Also they are small and awkward to load and even struggle to take a bike jacket .

I am going to bite the bullet and have bought a set of Givi Trekker Alaska panniers and will get a set of the Givi rails next month and fit them over the Winter in preparation for my trip down to the Alps next year .

 

[adventuredon]

If I recall it also gets quite toasty when in town!

Thats what I said to Dobles after my spin last week. It gets hot, its not a town bike esp with London's bloody 20mph killers all over the place

 

[Neil W]

Last two tanks of fuel I have tried out using E5 fuel instead of the previous E10.

Bike is giving a few mpg better ie 59 plus instead of 56 mpg and it is definitely smoother and more responsive so will be sticking with E5 from now one (in comparison to diesel prices the E5 petrol is a positive bargain )

 

[longdog]

Isn’t A&D in Denbigh? North Wales though and fair distance from Swansea. Two in Bristol and one Gloucester which are lots nearer.

Wasn’t the one in Gloucester a dedicated Guzzi dealership until a few years back? I think the Bristol one(s) maybe Riders? Either way, those are about 2 hours away and I don’t know if they have loan bikes available. I think A&D have a good reputation but it’s getting on for 4 hours each way of rather nice roads on a good day.

 

[Neil W]

All my bikes in recent years have been fitted with Auxiliary fog or spot lights and I prefer it as it does make the bike more visible to blind car drivers and gives you a little bit of an advantage .

Moto Guzzi charge about £100 for the fitting kit for their oem lights and then over £300 for their lights .

Not wanting to pay that I managed to pick up a fitting kit for £80 and then bought a kit of PUIG 2.0 spot lights , made my own bracket to mount onto the crash bars and a wiring loom from the lights to the Guzzi Auxiliary loom (it runs through the crash bars and uses the same connectors as the Moto Guzzi's own )

So for less than £200 I have a set of auxiliary lights that are integrated into the Guzzi wiring , switchgear and tft display

 

[walkingpictures]

All my bikes in recent years have been fitted with Auxiliary fog or spot lights and I prefer it as it does make the bike more visible to blind car drivers and gives you a little bit of an advantage .

Moto Guzzi charge about £100 for the fitting kit for their oem lights and then over £300 for their lights .

Not wanting to pay that I managed to pick up a fitting kit for £80 and then bought a kit of PUIG 2.0 spot lights , made my own bracket to mount onto the crash bars and a wiring loom from the lights to the Guzzi Auxiliary loom (it runs through the crash bars and uses the same connectors as the Moto Guzzi's own )

So for less than £200 I have a set of auxiliary lights that are integrated into the Guzzi wiring , switchgear and tft display View attachment 546054View attachment 546055

Made a neat job of that Neil,like it

 

[MartinK]

I currently have Denali S4 mounted the same.
But wired via a Denali DialDim because they're too bright (as DRL) without a dimmer
Thinking of trying a Denali Pure controller, because it's an odd main beam trigger on the Guzzi