cleaning 1150gs stainless pipes ?

so you just paint it on the stainless downpipes, leave for a few mins and rinse off?- thats it?
 
I'm with the harpic Power Plus Max 10 crowd, or whatever stupid name they have dreamt up now.

Best to remove the headers for a thorough job - if leaving them in place, make sure you mask up the engine; this stuff is aggressive & can easily spoil paint/lacquer finish.
 
so you just paint it on the stainless downpipes, leave for a few mins and rinse off?- thats it?

That's how I did mine, but had a pair of gloves on and rubbed it in with a bit of Scotchbrite cloth...( green dish scoured will do the same job.)...and yes as squibb suggests it's a good idea to mask off anything you don't want stripping :thumb2
 
Use safety precautions since Harpic contains hydrochloric acid which is why it's important to rinse it off well :rob
 
After reading this post I set about mine. Pretty happy with the results. I’m sure it could be better, but this only took me a couple of hours.

Before

367d08c68a99f43bbad255902d7d9bbe.jpg


After
81a97514c9e2dbbb9c66949c8f2aec6b.jpg



Sent from my iPhone using Tapatalk
 


Back
Top Bottom