Clutch cover

mhsnowy

Well-known member
UKGSer Subscriber
Joined
Aug 8, 2010
Messages
505
Reaction score
3
Location
Hertfordshire, England
Can anyone post a picture of the inside of the clutch cover showing me what I'm looking for to see if I have the modified clutch cover or not.

At the moment my clutch seems to grip/stick slightly on the very last bit of the lever when drive is taken up.

It is due an oil change and I know this might cure the problem, but thought while the oil is drained I might as well check the cover.

The bike has done just under 12000 miles.
 
i have spare one at home. if no joy by tonight i will dig tiotu and take pic for you
 
Can anyone post a picture of the inside of the clutch cover showing me what I'm looking for to see if I have the modified clutch cover or not.

At the moment my clutch seems to grip/stick slightly on the very last bit of the lever when drive is taken up.

It is due an oil change and I know this might cure the problem, but thought while the oil is drained I might as well check the cover.

The bike has done just under 12000 miles.

Do a search on this section of the form, there are several photos and posts that i have put on after all the hassle i went through with mine. essentially though there should be a steel collar in the centre of the clutch cover.

i cant post a link as i'm not on my laptop at present.
 
must check mine too as even new cable have adjust it fully get work correct
 
Changed the clutch cable and it seems to have cured the problems.

I'll still check the cover when I do the oil change.
 


Back
Top Bottom