fastway pegs on a 100GS?

[how much for a service!]

Hi
Does anyone know if i can get these pegs off my 1150GS will fit my 100gs?
does the centre sleeve come out because when I tighten the bolt up the pegs just lock up!.

 

[Timolgra]

The sleeve presses out, the spigot's longer one end so you can alter the height of the peg.
Of course it'll lock the peg when you tighten the bolt, it's supposed to be fitted with a pin and split pin.
Can't remember if it'll fit your bike though

 

[how much for a service!]

Thanks
Thought I would check before hitting the sleeve with a hammer!

 

[Canuck]

Ill let you know in two weeks... but if not you can order new sleeves from the manufacturer... cost about 12 quid posted I believe as I ordered a new set about two years ago.

 

[litelfun]

Hi
Does anyone know if i can get these pegs off my 1150GS will fit my 100gs?
does the centre sleeve come out because when I tighten the bolt up the pegs just lock up!.

Q-tech in germany du some rear pegs that are a nice bit of kit cost aboute 85 euro for a paire

 

[bumpmuncher]

Hi
Does anyone know if i can get these pegs off my 1150GS will fit my 100gs?
does the centre sleeve come out because when I tighten the bolt up the pegs just lock up!.

yes they will fit. if you want conformation just look at any of the fastaway retailers listings for GS footpegs. it would have taken less time than I have taken to type this reply

ps. use nylock and dont do themup so tight

 

[Canuck]

Oh... that nut as per the instructions is just to let you adjust where they stop (their level) owing their adjustment to the inclusion of washers.

 

[how much for a service!]

thanks guys thought there just might be a different insert but sure i will get it to work

 

[Belper phil]

Yes they will - he is right

yes they will fit.

Agree with the Bumpmuncher and if you look at paralever register photees posted recently - i've got them on both of mine - no bother at all!