Fitting a new can on a 06GSA

[CuzGS]

Going to fit a new can to my GSA, any top tips, already have the can just top tips for fitment if you have any

Oh it's a revolution one

 

[Zoton]

O ill say it.

Remove the other one first.

 

[Nice 'n' Fat]

I agree with him

 

[CuzGS]

Shit I was having problems with space, I'll try that , seriously ant tips on sealing or whatever

 

[Nice 'n' Fat]

It should seal up easily with the clamp provided so no need for any exhaust sealant

 

[Yonkyo]

Undo Exhaust clamp bolt on link pipe and slide down.
Remove hanger bolt.
wiggle the old can off.

Re-fit the new can in reverse order.
no need for sealant.
dont swing on the spanner too much.

jobs a good un....brumm brummm

 

[jamieg7762]

I fitted mine the other night, quick 10 min job.

When putting the remus can on loosen the two screws that hold the hanger in place.

This will help you when putting the screw back into the hanger, once this is in place you can twist and adjust the can for best fitment.

As Yonkyo said, no need for any sealant.

Hope this helps

 

[CuzGS]

Thanks guys, job done and tips appreciated and worked, now to go and cane it.

Thanks again