HELP - crash bar fitting

[chasr]

When you tighten everything up (Motech bars), check that there is some clearance between the oil feed pipe (on the left side of the engine) and the mount. I had to add a spacer (washer) to create a gap; others have had to do the same.

 

[GPLongford]

When you tighten everything up (Motech bars), check that there is some clearance between the oil feed pipe (on the left side of the engine) and the mount. I had to add a spacer (washer) to create a gap; others have had to do the same.

There is a gap, not a big one, but its there...