Good day fellow riders. Is anyone aware of an alternative to a PDM60? I fitted a Hex EzCan to my R1250 GSA with a view to running my heated clothing from it via the heated grips. This works fine but unfortunately, when you add heated gloves into the mix the gloves don't work. This, I have been informed by Hex is because the gloves have their own heat controller. I thought , as long as they were getting a power supply from the jacket cuffs lead then they would work. Not so. All that happens when I plug them in is the controller on the back of the glove pulses/blinks red. Hex have said that what I am trying to do will never work. I also have a PDM60 fitted to the bike. This would have been my backup to wire the heated clothing through but, because I have had the unit for so long now, approx 10-12 years or so, it will no longer allow me to program the wires to raise the amps. Is there an alternative to the PDM60 that can be programmed? I have tried going back to Rowe electronics but they aren't that easy to deal with. No replies to emails and when I tried to click the link for distributors nothing comes up. I know they are USA based but still. no distributors. I'm open to buying another or even the newer amplink but just thought there may be others. I know I can just wire in direct to the battery but I don't want wires everywhere and separate "Y" cables running through my clothing.
Any help or suggestions welcome. Cheers
Any help or suggestions welcome. Cheers

