rear disk wear

Les Wassall

HiD50.com leading light in HiD
UKGSer Subscriber
Joined
Jan 15, 2003
Messages
4,038
Reaction score
8
Location
Cheshire
How much is the rear disk allowed in wear, the calliper stuck a while back and the bm pads cut in a little, since have replaiced with a set of Ferodo Platinum,m they do not seem to have worn the disk anymore, but there is a slight lip on th edge of the disk.

:beerjug:
 
Les Wassall said:
How much is the rear disk allowed in wear, the calliper stuck a while back and the bm pads cut in a little, since have replaiced with a set of Ferodo Platinum,m they do not seem to have worn the disk anymore, but there is a slight lip on th edge of the disk.

:beerjug:

stop planning jollies to the mainland, and RTFM
[that I even printed for you], I think the max run out is 4mm for the rear disk:D
 
Re: Re: rear disk wear

Chris G said:
RTFM [that I even printed for you], I think the max run out is 4mm for the rear disk:D

Only read labels on bottles :D :D
 
4.5 actually



everyone loves a smart arse :D :D

and disc is spelt with a C :D
 
allowable run out of 4.5mm? that would batter the callipers off :eek:

thickness perhaps?
 
Les Wassall said:
Rear disc wear?

I don't think there's anything specifically made, but you could try modifying a balaclava.
 
cookie said:
allowable run out of 4.5mm? that would batter the callipers off :eek:

thickness perhaps?

Yes thickness , that's what les asked ?

no room for two smart arses in he same post :D :D
 
:beerjug: disC is still ok at the moment then. :D

But the balaclava got stuck in the wheel :P :D
 
Les Wassall said:
How much is the rear disk allowed in wear, the calliper stuck a while back and the bm pads cut in a little, since have replaiced with a set of Ferodo Platinum,m they do not seem to have worn the disk anymore, but there is a slight lip on th edge of the disk.

:beerjug:

4.5mm is minimum if I recall correctly
 


Back
Top Bottom