rear disk wear

Les Wassall

HiD50.com leading light in HiD
UKGSer Subscriber
Joined
Jan 15, 2003
Messages
4,038
Reaction score
10
Location
Cheshire
How much is the rear disk allowed in wear, the calliper stuck a while back and the bm pads cut in a little, since have replaiced with a set of Ferodo Platinum,m they do not seem to have worn the disk anymore, but there is a slight lip on th edge of the disk.

:beerjug:
 
Les Wassall said:
How much is the rear disk allowed in wear, the calliper stuck a while back and the bm pads cut in a little, since have replaiced with a set of Ferodo Platinum,m they do not seem to have worn the disk anymore, but there is a slight lip on th edge of the disk.

:beerjug:

stop planning jollies to the mainland, and RTFM
[that I even printed for you], I think the max run out is 4mm for the rear disk:D
 
Re: Re: rear disk wear

Chris G said:
RTFM [that I even printed for you], I think the max run out is 4mm for the rear disk:D

Only read labels on bottles :D :D
 
4.5 actually



everyone loves a smart arse :D :D

and disc is spelt with a C :D
 
allowable run out of 4.5mm? that would batter the callipers off :eek:

thickness perhaps?
 
Les Wassall said:
Rear disc wear?

I don't think there's anything specifically made, but you could try modifying a balaclava.
 
cookie said:
allowable run out of 4.5mm? that would batter the callipers off :eek:

thickness perhaps?

Yes thickness , that's what les asked ?

no room for two smart arses in he same post :D :D
 
:beerjug: disC is still ok at the moment then. :D

But the balaclava got stuck in the wheel :P :D
 
Les Wassall said:
How much is the rear disk allowed in wear, the calliper stuck a while back and the bm pads cut in a little, since have replaiced with a set of Ferodo Platinum,m they do not seem to have worn the disk anymore, but there is a slight lip on th edge of the disk.

:beerjug:

4.5mm is minimum if I recall correctly
 


Back
Top Bottom