Risers suggestions.

[GSMarky]

I opted for the BMW straight up 30mm risers. i think the slight lift should do the trick without impacting on my tank bags, if not keep and eye on the for sale section.
Thanks all for the responses.

Good point... My GSA 'Auto Stops' sometimes on full right lock when my tank bag's on...

 

[Hartley]

Good point... My GSA 'Auto Stops' sometimes on full right lock when my tank bag's on...

My Crosstourer got me some weird looks on the Santander ferry when the auto horn was constantly activated by my tank bag.

 

[GSMarky]

My Crosstourer got me some weird looks on the Santander ferry when the auto horn was constantly activated by my tank bag.

That too on the other lock!!

 

[andy tims]

I had RoxSpeed 2" pivoting risers on my 1250. They are very adjustable.

RoxSpeed 2 inch pivoting risers for the BMW R1200GS (2013 on) Water Cooled bike (1R-P13R-2125)

RoxSpeed 2 inch pivoting risers for the BMW R1200GS (2013 on) Water Cooled bike

www.adventurebikeshop.co.uk

I might put them up for sale soon as I think I'm OK with the 1300 "as is"

 

[Hartley]

I had RoxSpeed 2" pivoting risers on my 1250. They are very adjustable.

RoxSpeed 2 inch pivoting risers for the BMW R1200GS (2013 on) Water Cooled bike (1R-P13R-2125)

RoxSpeed 2 inch pivoting risers for the BMW R1200GS (2013 on) Water Cooled bike

www.adventurebikeshop.co.uk

I might put them up for sale soon as I think I'm OK with the 1300 "as is"

Thanks Andy but ordered the BM ones now, should arrive today.

 

[GSMarky]

Thanks Andy but ordered the BM ones now, should arrive today.

Can you post some pics please as I may be interested in the same?

Maybe even meet for a cuppa and I could have a sit to try them for size?

 

[Hartley]

Can you post some pics please as I may be interested in the same?

Maybe even meet for a cuppa and I could have a sit to try them for size?

Yeah sure, I plan to fit them later today, I’ll get before and after pics if I get to do it.
Meet up over due too

 

[Hartley]

Grrrr.
Didn’t go quite to plan.
Got the bars off and was fitting them back on and I’ve been sent a suspect fixing. Felt iffy spinning it in , had a look and its different to the others.
Land ( unthreaded part) is different length and there no bolt grading on the head.
Probably ok but if it ain’t right what is it?

 

[GSMarky]

Wise that they are all the same, but the rogue one looks like it should work to me still..

I order these from eBay all the time. Just measure the length of the parallel section & thread length under the head along with the diameter. I'd get A2 grade Stainless personally which these probably are.

 

[Hartley]

Wise that they are all the same, but the rogue one looks like it should work to me still..

I order these from eBay all the time. Just measure the length of the parallel section & thread length under the head along with the diameter. I'd get A2 grade Stainless personally which these probably are.

I’ve been in touch with dealer and they’re sending me one out.
The thread quality on the odd one isn’t right, i could feel it as I spun it in, it’s the thing that made me look closer.
Agree the land length would cause an issue but with no grading on the head I no idea what it is. ( even though its torque is well below max on an 8.8 grade)
New one on the way so I’ll wait.shame as I’m out with some mates for a 200 mile ride today so it’d been perfect to try it out.

 

[andy tims]

My RoxSpeed risers are listed now

For Sale Thread 'RoxSpeed Pivoting Bar Risers R1200/1250 GS & GSA'

Apr 6, 2025

Now surplus to requirements, off my 1250 GS, these allow fine tuning of the bar positioning between up and back

I'm asking £110.00 posted 2nd class tracked in the UK which is a substantial discount on new.

RoxSpeed 2 inch pivoting risers for the BMW R1200GS (2013 on) Water Cooled bike (1R-P13R-2125)

RoxSpeed 2 inch pivoting risers for the BMW R1200GS (2013 on) Water Cooled bike

www.adventurebikeshop.co.uk

• andy tims
• Replies: 4
• Forum: Old ads

 

[Robbo1200ADV]

Wunderlich up and back on my 1300GSA have made it much more comfortable and more like the1250 GSA !! It felt tight in my shoulders before now its like my Fat Boy !! Love them

 

[Hartley]

Replacement bolt arrive yesterday so fitted the risers when I got home tonight.
Some before and after pics.

Quadlock or small tank bag would need adjusting for safety but fine with bigger bag.

I’ll try it out over weekend.

 

[Hartley]

Got out today to try the risers. Seem to make the bike a little more comfortable, didn’t get as long as I wanted to try them out as on my way to Boston I picked up a passenger.

Some sticky string stuff sorted it and held pressure all the way home but new boots time now.