Spotlight fitting

karlp

Well-known member
UKGSer Subscriber
Joined
Dec 8, 2007
Messages
4,997
Reaction score
1,725
Location
Southampton, England
Just bought some BuMW spotlights to fit on a GSA but have no real idea where the electrical connections are located.

I presume under the tank - does anyone have any pics or info please.

thanks
 
The fuse for the aux lights is under near side cover. Follow leads etc. from there.

Pic's in Owner's manual.

Replacing fuses for
auxiliary headlightsOE
Open fuse box 1.
To do so, squeeze locking
clips 2 at top and bottom together
and remove the fuse
cover.
Replace the defective fuse.
Fuse for auxiliary headlight
with auxiliary headlights OE
7.5 A
Replace fuse 3 for right headlight.
Replace fuse 4 for left headlight.
Close the fuse box.
8
131
z
Ma
 
Thanks

I am fitting a complete new set so have no wires on the bike.

In owners manual it shows a fuse box near the front forks so I will fit the new box in this location - if i can find it.

However I also have this Haynes service manual but it only goes to '06. In here it mentions fuses under the ECUis location.

So before I take the tank off just want to be sure this is where it all is.
 


Back
Top Bottom