Top Dead Centre Tool - 2017 R1200GS Adventure

It sounds like I'm being critical, but I'm not trying to be.

I found the video's excellent.

My only confusion was use of the TDC Tool when moving from one side of the bike to the other.... and torque settings on the Camshaft Bolts.

Other than that... brilliant :D
 
Putting any content on YouTube is a HUGE learning curve all to it's own! Once you post a video, to make an edit, basically you have to delete the video, which kills ALL links to it as well as the comments, then publish another video, which is a separate link. The only allowance given in YouTube is for the creator of the video to make edits/addendums to the Description section.

Sorry for this error on my part...totally MY mistake!
 
Snapon FRDHM16 finally arriving in Germany, should have it in 2 weeks 37€ not cheap but hate chinese crap.................:hippy
 
We did Tall Lads bike today. 14 Reg R1200 GSA with 24,000 miles

All valves were in spec both sides. No problems.

Cam alignment and sensor were out of alignment. So we sorted that out both sides.

Started her up and all sweet. He's really pleased, so another one good to go. :D
 
Warlord said:
We did Tall Lads bike today. 14 Reg R1200 GSA with 24,000 miles

All valves were in spec both sides. No problems.

Cam alignment and sensor were out of alignment. So we sorted that out both sides.

Started her up and all sweet. He's really pleased, so another one good to go. :D
Click to expand...

Right tools and Boxflyer video, what could go wrong..............;)
 
Was out today with Tall Lad on his GSA after the Cam Alignment...

He's reported back saying the bike is now smoother, and another benefit is the Shift Assist (quickshifter) is now working smoothly and not jarring or grating between gear changes.
 
Warlord said:
Was out today with Tall Lad on his GSA after the Cam Alignment...

He's reported back saying the bike is now smoother, and another benefit is the Shift Assist (quickshifter) is now working smoothly and not jarring or grating between gear changes.
Click to expand...

Does it go quicker than a 1250 now..................:moped::moped::moped::moped:
 
Much quicker than a 1250!!

Well maybe not but as Warlord said, Quickshifter much smoother and no jarring like it used to. Revs much smoother too! Well chuffed!!

Expensive tools (well for Warlord) but well worth it in my opinion!
 
Tall Lad said:
Much quicker than a 1250!!

Well maybe not but as Warlord said, Quickshifter much smoother and no jarring like it used to. Revs much smoother too! Well chuffed!!

Expensive tools (well for Warlord) but well worth it in my opinion!
Click to expand...

Well it is worth it, and you seemed very settled on your bike yesterday. So all good :)

I think the Cam Alignment in some ways is more beneficial than the valve check... so it's good to get it done :D
 
Tall Lad said:
Much quicker than a 1250!!

Well maybe not but as Warlord said, Quickshifter much smoother and no jarring like it used to. Revs much smoother too! Well chuffed!!

Expensive tools (well for Warlord) but well worth it in my opinion!
Click to expand...

No need to Hillcrop then................:hippy
 
Nippy Normans supply Touratech, Wunderlich, Desert Fox and many other makes of accessories.
You must log in or register to reply here.

Similar threads

Bung covering the top dead centre hole
Replies
10
Views
1,458
Flipfly
Flipfly
Top dead centre pin
Replies
10
Views
3,018
Deleted account 230327001
Andy Hird
Top Dead Centre
Replies
6
Views
1,571
Andy Hird
Andy Hird


Back
Top Bottom