Touratech HID Headlamp and Tobinators - 1150 GSA

Robster

Registered user
Joined
May 14, 2008
Messages
157
Reaction score
0
Location
Fetcham
Ello ello ello.

I'm new to these parts, having only had my GSA for 2 weeks now after a kind old lady wrote my trusty Honda Varadero off last month!

The GS came pretty much fully specced as I would have liked it, but my first purchase was as set of Tobinators as the airflow seems to be catching me square in the face.

Upon fitting them, and at about "Step 2" in the Tobinator instructions I spotted a problem...but I had to persevere to the bitter end just to make sure it was indeed a problem. Yes I know, but that's just how my mind works!

Anyway, the problem is this: I have a Touratech HID Headlight which came along with the bike which mounts on the left hand side (as you're sitting on the bike). It mounts to the very bit that you have to remove in order to fit the Tobinators!

Has anyone else got/had this combination and experienced and hopefully solved this problem? I guess it's a case of moving the mounting point for the HID...but where to and how?

Any advice welcome!

Cheers :beerjug:
 
Ello ello ello.

I'm new to these parts, having only had my GSA for 2 weeks now after a kind old lady wrote my trusty Honda Varadero off last month!

The GS came pretty much fully specced as I would have liked it, but my first purchase was as set of Tobinators as the airflow seems to be catching me square in the face.

Upon fitting them, and at about "Step 2" in the Tobinator instructions I spotted a problem...but I had to persevere to the bitter end just to make sure it was indeed a problem. Yes I know, but that's just how my mind works!

Anyway, the problem is this: I have a Touratech HID Headlight which came along with the bike which mounts on the left hand side (as you're sitting on the bike). It mounts to the very bit that you have to remove in order to fit the Tobinators!

Has anyone else got/had this combination and experienced and hopefully solved this problem? I guess it's a case of moving the mounting point for the HID...but where to and how?

Any advice welcome!

Cheers :beerjug:


Hi Rob,

Post a picture if you can as it will help other tossers identify the problem. It sounds to me like you have some spots fitted and may need to consider a light bar which fits under the beak.....:thumb
 
Hmmmmm, well I've just had a look at the picture on the Touratech site and it looks like my HID is mounted elsewhere than they reckon it should go!

01-040-1503-0_I_01.JPG



Mine is attached to the left side screen mount...hmmm, will need to go down to the carpark at lunchtime and take a proper look :rolleyes:
 
Just spotted the reason it's mounted where it is...

You can see where the "standard" OEM Fog lights are mounted...well, that's where the Touratech HID is supposed to go too. Hmmmmmmmmmm bugger

Qp91kEs6v5RPrk5MowuuwkBtBODnLX1r0280.jpg
 
Nobody else encountered this then?

I cant believe I'm the only one that's go this set-up! :rolleyes:
 
BMW fogs

How can these (expensive) things give out any light? the lenses are almost obscured by plastic. Go HID and for get the stupid things.
 
Last edited:


Back
Top Bottom