WHICH 1150 AFTERMARKET SCREEN ?

[DrAlf]

MRA for me too. Not too keen on the looks of the thing but it does seem to work. If I'm not going too far or if I'm going offroad, I take the top bit off but on longer runs I opt for the full on barn door.

At some point I'd like to try tobinators with just the lower part of the MRA, anyone tried this?

Lower MRA.....

Barn door + Andy's custom screen.

 

[Bryn]

Re: screen

OK Guys (and ladeeeeeze)

read all the stuff posted here and like the look (and the price) of the MRA screen. BUT, how does it compare to an adventure screen with Tobinators. Better? Worse?. What do you reckon. I've got the standard screen with tobinators at the moment, but want a change.

Post replies!!
Richie

I've got the Adv screen with tobinators, which is a vast improvement on standard Adv screen ... But I still think things could be better, and I reckon an MRA screen is the next thing.

Bryn

 

[BiG DoM]

Look SERIOUSLY at the CeeBailey screens - these are the RR of screens... complete custom service for size, style, tint etc. I rate it them the best. Unfortunately not that well known that side of the pond!

http://www.ceebaileys.com/cycle/

 

[Brother 52]

Look SERIOUSLY at the CeeBailey screens - these are the RR of screens... complete custom service for size, style, tint etc. I rate it them the best. Unfortunately not that well known that side of the pond!

http://www.ceebaileys.com/cycle/

Bet they work really well but by f*ck there ugly

 

[Tim Angus]

I tried a Givi (approx £80) and available at most BM dealers. It made my trip to Interlaken on a 1150GS bearable. We had to do a high speed dash on Frence motorways as we had only 1 overnight stop before Intelaken. I am 6'1" and it worked OK for me, I could not stand the noise with the stock screen.
The Givi retains the standard mount so you retain the tilt facility of the original.

 

[taz]

screens

Try the adv screen with tobinators had a mra but never got it comfortable less buffeting but loud, i find the adv screen better but i am only 5'10" i run with it pulled back and low with mountings trimmed

 

[gasman]

hi tim

Hi Tim,
Couldn't PM you.
Shame you left CooperReading. (you are THAT Tim Angus I take it) Hope it wasn't the flak you got from here ! I thought you did a good job.
Peter - silver W reg 1150GS