Bmgsrider
Whataboutyee.
Need to replace air filter on my gsa lc but cannot find any info as how and what is involved in strip down, so to the font of all knowledge on this site,i would be grateful for any info passed.
Remove seats, then remove top centre panel of the fuel tank by removing 3 tx25 screws. 2 screws are under the front part of riders seat and 1 screw at the front of the panel by the headstock. Centre panel should then be loose but still held in place by poppers. Gently pull it off and air box will be seen in front of the fuel cell.
Hope this helps.
EV.
Sent from my iPhone using Tapatalk

As above, but if you have the GSA, there are a further 2 T25 screws under the small flap on top of the tank to undo as well. It will also help just to loosen off or remove the top side cowls so as to make life easier getting the airbox cover off. All very easy to do.![]()
Need to replace air filter on my gsa lc but cannot find any info as how and what is involved in strip down, so to the font of all knowledge on this site,i would be grateful for any info passed.
Bought secondhand , guy says he cannot find book at time of sale.
Bought secondhand , guy says he cannot find book at time of sale.
Well it was 8 months old with 3000 miles so not a sweat.That's not good! Owners manual also contains service book as part of a same book. Meaning you bought a bike without service history. Ohh dear.....
Sent from my iPhone using Tapatalk
Well it was 8 months old with 3000 miles so not a sweat.
Sent from my SM-J510FN using Tapatalk
I fitted a K&N filter to my GSA at time of change its a marked improvement over standard, the bike revs a bit more readily and feels better on acceleration.
Terry