I guess that's why the original nut costs Euro 80.
picture source: member derbronner @ http://www.gs-forum.eu
FD Castle Nut
- Thread starter patzx12
- Start date
I guess that's why the original nut costs Euro 80.
picture source: member derbronner @ http://www.gs-forum.eu
Payment sent 
And someone resize the enormouse picture above .
It's fecking up my notebook
And someone resize the enormouse picture above .
It's fecking up my notebook
patzx12
Registered user
Hi Bert,
It sounds like you have a worn small pinion bearing.
I is no problem sending a Castle nut tool to Germany.
I will get a rate.
I am in Spain for the chrismas with my GSA. the rain finished today and its sunny.
It sounds like you have a worn small pinion bearing.
I is no problem sending a Castle nut tool to Germany.
I will get a rate.
I am in Spain for the chrismas with my GSA. the rain finished today and its sunny.
Berte
Registered user
Hi Pat,
thanks for your quick response. Enjoy your time in Spain and have a nice Christmas.
Best regards from Germany.
Bert
thanks for your quick response. Enjoy your time in Spain and have a nice Christmas.
Best regards from Germany.
Bert
FD CATLE NUT TOOL
Hi ,been out of the loop for a while
,have any tools been sent/despatched?
Hi ,been out of the loop for a while
,have any tools been sent/despatched?
Kremmen
Registered user
Not sure but i think Pat is in Spain over Christmas ....lucky sod
Quote from a pm from the man
"I will be off to Spain soon.
I am making a batch and plan to send them out late Jan 2011."
"I will be off to Spain soon.
I am making a batch and plan to send them out late Jan 2011."
patzx12
Registered user
Hi In Bordeaux on the way back, i will be sending them out end of Jan, if anyone has an urgent requirement let me know.
by the way weather is great it was 17 degrees yesterday
by the way weather is great it was 17 degrees yesterday
patzx12
Registered user
Update:
The bach is complete and we will be dispatching next week.
Again if anyone need one urgently let me know.
Regards, and thanks.
The bach is complete and we will be dispatching next week.
Again if anyone need one urgently let me know.
Regards, and thanks.
Payment sent
Hi Pat,
Payment sent at 6pm this evening 28/01/2011.
Thankls for all your hard work.
Hi Pat,
Payment sent at 6pm this evening 28/01/2011.
Thankls for all your hard work.
- Joined
- Jul 14, 2010
- Messages
- 10,377
- Reaction score
- 3,608
hi pat .payment sent,3/2/11.by the way has any one tried to air gun one yet??did it work or did it destroy the alloy castle nut??mike.
castle nut
Hi have any of the tools been sent out
Hi have any of the tools been sent out
patzx12
Registered user
Hi Guys sorry for the delay, i am languishing here in hospital after a minor out paitient procedure on the 21st Jan ended with me getting a bad infection and abcsess.
I am allowed out during the day now, so i will organise one of the guys to sort out the dispatch next week.
Sorry for the delay
I am allowed out during the day now, so i will organise one of the guys to sort out the dispatch next week.
Sorry for the delay
patzx12
Registered user
I am fit again well 90%, these nuts are bugging me now they are a loose end and i don’t like loose end.
I couldn’t look at them this week due to customer requirements.
I hate how work gets in the way of bike projects.
The first batch is ready, I will start the postage next week, the slowest bit is de-burring th bu—ers.
Thanks for your patients and please remember this is not a commercial venture, these nuts are the deal of the month at £35 each.
I put together a buddies FD recently and this is how I used the Nut wrench.
Remember if anyone is needing one urgent, let me know and I will put you first for postage otherwise I will send them out as ordered.
PS: I sincerely hope you will never have to use the wrench.
I don’t think there is much chance of them slipping on the castle nut, they are a snug fit and are supported by the pinion shaft.
I don’t take the chance, I support the wrench with a packing and clamp an object behind to prevent them sliding back.
This is what I do:
• Mount the FD, I have a picture of the old plate I use.
• Clamp everything down.
• Support under the wrench and loosen the 24mm nut.
• Remove the inner steel sleeve.
• Fit the castle nut wrench, tap it home with a mallet.
• Support underneath and at the back if you can.
• Undo.
• I just reverse the procedure to re assemble.
I will make a drawing of the plate and post it.
I couldn’t look at them this week due to customer requirements.
I hate how work gets in the way of bike projects.
The first batch is ready, I will start the postage next week, the slowest bit is de-burring th bu—ers.
Thanks for your patients and please remember this is not a commercial venture, these nuts are the deal of the month at £35 each.
I put together a buddies FD recently and this is how I used the Nut wrench.
Remember if anyone is needing one urgent, let me know and I will put you first for postage otherwise I will send them out as ordered.
PS: I sincerely hope you will never have to use the wrench.
I don’t think there is much chance of them slipping on the castle nut, they are a snug fit and are supported by the pinion shaft.
I don’t take the chance, I support the wrench with a packing and clamp an object behind to prevent them sliding back.
This is what I do:
• Mount the FD, I have a picture of the old plate I use.
• Clamp everything down.
• Support under the wrench and loosen the 24mm nut.
• Remove the inner steel sleeve.
• Fit the castle nut wrench, tap it home with a mallet.
• Support underneath and at the back if you can.
• Undo.
• I just reverse the procedure to re assemble.
I will make a drawing of the plate and post it.
Attachments
patzx12
Registered user
patzx12
Registered user
A right job this packing and posting,
I am sending as per my Paypal list.
If anyone wants one:
-Make sure you make payment PAYPAL GIFT.
-Put your postal address on the Paypal note.
Can you guys PM me when you get your Wrench, i dont want to miss anyone out.
Thanks
I am sending as per my Paypal list.
If anyone wants one:
-Make sure you make payment PAYPAL GIFT.
-Put your postal address on the Paypal note.
Can you guys PM me when you get your Wrench, i dont want to miss anyone out.
Thanks
Similar threads
