ahebron
Registered user
Going on Flipflys reccommendation I emailed Juntos and was told to go to their Ebay site.
http://www.ebay.com/usr/lightronic-intl
and bought
http://www.ebay.com/itm/301973715131?_trksid=p2057872.m2749.l2648&ssPageName=STRK:MEBIDX:IT
They are not 60w more like 50w but still bloody bright and flood the road with a lot of light.
And as Flipfly stated they make heavy lamps.
While on their site I also ordered some
http://www.ebay.com/itm/291669120252?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Obvious reason why.
And finally to hook these up to the bike electrics some of these though only one for the lamps.
http://www.jaycar.co.nz/automotive-fused-relay-spst-30a/p/SY4077.
One less thing to worry about.
A few photos of my set up.
Please excuse the upside down ones, I have no idea why they are that way as they are correct on my PC.
For those interested I made the light bar myself bending up some 19mm tube and welding mounting plates onto it.
I kept it tight to bike and crashbars so it looks like it is part of the crashframe
This is bolted below the upper crashbar mounts under the oilcooler
I mounted the lamps high as I believe height is our friend when it comes to driving lamps.
A side effect of this is I can reach the lamps while riding if need be





Adrian
http://www.ebay.com/usr/lightronic-intl
and bought
http://www.ebay.com/itm/301973715131?_trksid=p2057872.m2749.l2648&ssPageName=STRK:MEBIDX:IT
They are not 60w more like 50w but still bloody bright and flood the road with a lot of light.
And as Flipfly stated they make heavy lamps.
While on their site I also ordered some
http://www.ebay.com/itm/291669120252?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Obvious reason why.
And finally to hook these up to the bike electrics some of these though only one for the lamps.
http://www.jaycar.co.nz/automotive-fused-relay-spst-30a/p/SY4077.
One less thing to worry about.
A few photos of my set up.
Please excuse the upside down ones, I have no idea why they are that way as they are correct on my PC.
For those interested I made the light bar myself bending up some 19mm tube and welding mounting plates onto it.
I kept it tight to bike and crashbars so it looks like it is part of the crashframe
This is bolted below the upper crashbar mounts under the oilcooler
I mounted the lamps high as I believe height is our friend when it comes to driving lamps.
A side effect of this is I can reach the lamps while riding if need be






Adrian