Yeah it does...
1250 GSA exhaust options
- Thread starter Daggerit
- Start date
Yeah it does...
Weird Bob
Registered user
I haven’t seen any after market headers for the 1250 yet. I wonder will they have the a port for the post cat sensor or would just give such bad readings that there would be no point adding it?
If its anything like the flap valve, it cud also be a dummy post cat lamba
Sent from my SM-G950F using Tapatalk
Sent from my SM-G950F using Tapatalk
Its probably the case yes, but that doesnt mean that it actually does anything of any great importance, bit like my refrence to the flap valve, its supposed to be there to control noise levels, but firstly its default setting is "open wide", and then secondly aslong as the valve control box performs the pull test on start up, which basically means aslong as the control box is still connected and operating and for this it doesnt matter whether the cables are connected to the flap valve or not, the ecu is happy, so basically noise or emmision laws covered, but other than that, pointless, not saying the down stream lamba is the same, but untill somebody can show us, or prove to us, you never know in this day and age
Sent from my SM-G950F using Tapatalk
I like your style of thinkinYeah, I gotcha. I’ll maybe try it right before it goes into BMW for its running in service so they can reset any errors or anything.
Sent from my iPhone using Tapatalk
Sent from my SM-G950F using Tapatalk
Mattyfish16
Registered user
BMW 1200RS exhaust fit the BMW 1250GS
As the title says - will it fit?
Have a Remus can off their RS, would love to save some pennies
As the title says - will it fit?
Have a Remus can off their RS, would love to save some pennies
I have Austin Racing Ventura can on mine love the sound and always pops as you go over 4500 revs
The only exhaust for the 2013-18 R1200GS or the 2019 on R1250GS is the Akrapovic E-3 muffler sold through Akrapovic or BMW ! Lighter and better sound than the original and removeable baffles for a nice deep boom.
When you see how restrictive the E-4 Akrapovic is when you look inside the muffler you wonder how the bike can make power at all ? Waste of money !
Get the less restrictive E-3 or save your dough.
When you see how restrictive the E-4 Akrapovic is when you look inside the muffler you wonder how the bike can make power at all ? Waste of money !
Get the less restrictive E-3 or save your dough.
I have 1250 gs on 68 plate and it came with AR Ventura can on definitely worth a look 
sshaun2012
Registered user
Has anyone installed or heard the termignoni exhaust?
www.omniaracing.net/en/termignoni-a...-for-bmw-r1250gs-adventure-2019-p-153863.html
www.omniaracing.net/en/termignoni-a...-for-bmw-r1250gs-adventure-2019-p-153863.html
PH1969
Registered user
I fitted a full Remus system to my 1200 Rallye. I can only say it is fantastic in quality and durability, sounds great with or without baffle and very straight forward to fit. I chose the black Hexacone and the cost of the headers and the exhaust together were the same as the Akraprovic slip-on so it really was a no-brainer. Wouldn't hesitate to fit the same again to my next bike.
Belco100
Registered user
Beautifully made exhausts, used by a lot of Ducati riders. I saw one tested on a R1200GS on a German site and it lost a few hp, but looked lovely,
I've just bought this HP CORSE BLACK for my 1250 Exclusive, delivered today not opened the box yet, saw it on another Exclusive on here (Dell I think has one), dont know what they sound like but a lot cheaper than the Akra pregnant fish type and to my eyes look better on a 1250 Exclusive.
Sent from my SM-G950F using Tapatalk
Sent from my SM-G950F using Tapatalk
That looks really good, are the baffles removable?
No still in exhaust
Happy with sound
Happy with sound
Similar threads
