I like good value. I bought one of those holy grail units 12 years ago but sold it to Steptoe. Can I buy it back?! 
It would be a harmonious full circle moment
It would be a harmonious full circle moment
Comfy old boots bike service resto thread
- Thread starter Comfy Old Boots
- Start date
Thanks mr 48. I’ll buy this so.
Love the Belfast connection.
You’re sure it’s manufactured there? Any idea if there is a favoured local distributor?
Last edited:
Also, bolts holding the end float were very very tight. Proper crack off them when opened. Tightened to 9nm as per steptoes 850/1150 thread. Hope this is good. As always let me know if I’m wrong. A bit like telling me my flies are downI’ll be embarrassed but thankful.
The big torx 40 jobbies??They are tighter than 9NM Owen!!
recheck !
Just quoting from Steptoe ms post from April 21st 2006
They are tighter than 9NM Owen!!
recheck !
Maybe I’m missing something?
Honestly, I'm finding it quite difficult trusting anything / anyone. I've had max Bmw wrong and Haynes wrong. I mean it's quite obvious how my luggage rack goes back together. the parts manuals were wrong. I move on I sort it
so
wtf?
where do I get accurate torque values???????????????????????????
I'm happy to retorque everything I've touched..
Steptoe?
Listen pal, removing that rusted thing in the swing arm is removed by a slide hammer not a hammer and blunt chisel.
I'd love a set of oem torque values for a 2007 R1200 gs. Ireland / uk version
so
wtf?
where do I get accurate torque values???????????????????????????
I'm happy to retorque everything I've touched..
Steptoe?
Listen pal, removing that rusted thing in the swing arm is removed by a slide hammer not a hammer and blunt chisel.
I'd love a set of oem torque values for a 2007 R1200 gs. Ireland / uk version
U on the soup last night ?
Chill big man
From what I remember the 9NM is for the spring plate retainer M6 thread
2,3 and 4 are M8 and the 18NM
Chill big man
From what I remember the 9NM is for the spring plate retainer M6 thread
2,3 and 4 are M8 and the 18NM
I sure was. Sorry for the strop. We buried my uncle Saturday and along with being overtired I got upset and took it out on you lot. Apologies. As usual I’m full of regret.
I’ll be double checking the important bolts.
Last edited:
Yes, I think you missed that the engine in the pictures is not a 1200, it is an earlier 850 or 1100 I believe.
Whilst the basic engine principles are the same there are a lot of differences. A "1200" cam also mean different things, you need to be sure that information you source is for the 2004-2010 range. After that there were vey significant engine changes.
BTW, kicking Steptoe is not a good idea, he may have some faults but he has been working, professionally, on this range of bikes for a very long time. You can tap that pivot out from the other side, I have done exactly that using a long bar.
Everyone that replies to questions is happy to do so, we have all been there at some stage in our lives. For some if us that may have been longer ago than we would like. We have nothing to gain by taking the time to write our comments, research the infirmation or to search for photos. That is our own free time we use. When someone posts a link from a previous post it may have taken some time to find it. Knowing it is there dies not make it easier to find. Sometimes it can be frustrating and take a lot longer than we had wished. We also have partners who would like to share time with us, dinners to cook etc...
Sometimes, it pays to step back, breathe, enjoy the ilother things around us.
Similar threads
